Go to the documentation of this file.
   32 #define TOP  0x01000000 
   41     rc->
code  = bytestream2_get_be32(gb);
 
   49         for (j = 0; j < 4096; j++) {
 
   50             if (
s->pixel_model[
comp][j].total_freq != 256) {
 
   51                 for (
i = 0; 
i < 256; 
i++)
 
   52                     s->pixel_model[
comp][j].freq[
i] = 1;
 
   54                     s->pixel_model[
comp][j].lookup[
i] = 16;
 
   55                 s->pixel_model[
comp][j].total_freq = 256;
 
   60     for (j = 0; j < 6; j++) {
 
   61         uint32_t *p = 
s->run_model[j];
 
   62         for (
i = 0; 
i < 256; 
i++)
 
   67     for (j = 0; j < 6; j++) {
 
   68         uint32_t *
op = 
s->op_model[j];
 
   69         for (
i = 0; 
i < 6; 
i++)
 
   74     for (
i = 0; 
i < 256; 
i++) {
 
   75         s->range_model[
i] = 1;
 
   76         s->count_model[
i] = 1;
 
   78     s->range_model[256] = 256;
 
   79     s->count_model[256] = 256;
 
   81     for (
i = 0; 
i < 5; 
i++) {
 
   86     for (j = 0; j < 4; j++) {
 
   87         for (
i = 0; 
i < 16; 
i++) {
 
   88             s->sxy_model[j][
i] = 1;
 
   90         s->sxy_model[j][16] = 16;
 
   93     for (
i = 0; 
i < 512; 
i++) {
 
   94         s->mv_model[0][
i] = 1;
 
   95         s->mv_model[1][
i] = 1;
 
   97     s->mv_model[0][512] = 512;
 
   98     s->mv_model[1][512] = 512;
 
  107         uint32_t 
byte = bytestream2_get_byteu(gb);
 
  137     t = rc->
range * (uint64_t)cumFreq / total_freq;
 
  140     rc->
range = rc->
range * (uint64_t)(freq + cumFreq) / total_freq - (t + 1);
 
  143         uint32_t 
byte = bytestream2_get_byteu(gb);
 
  157     *freq = total_freq * (uint64_t)(rc->
code - rc->
code1) / rc->
range;
 
  166     uint32_t totfr = cnt[maxc];
 
  168     uint32_t 
c = 0, cumfr = 0, cnt_c = 0;
 
  171     if ((
ret = 
s->get_freq(rc, totfr, &
value)) < 0)
 
  176         if (
value >= cumfr + cnt_c)
 
  186     if ((
ret = 
s->decode(gb, rc, cumfr, cnt_c, totfr)) < 0)
 
  189     cnt[
c] = cnt_c + 
step;
 
  193         for (
i = 0; 
i < maxc; 
i++) {
 
  194             uint32_t nc = (cnt[
i] >> 1) + 1;
 
  210     uint32_t totfr = 
pixel->total_freq;
 
  211     uint32_t 
value, x = 0, cumfr = 0, cnt_x = 0;
 
  212     int i, j, 
ret, 
c, cnt_c;
 
  214     if ((
ret = 
s->get_freq(rc, totfr, &
value)) < 0)
 
  218         cnt_x = 
pixel->lookup[x];
 
  219         if (
value >= cumfr + cnt_x)
 
  230         if (
value >= cumfr + cnt_c)
 
  236     if (x >= 16 || 
c >= 256) {
 
  240     if ((
ret = 
s->decode(gb, rc, cumfr, cnt_c, totfr)) < 0)
 
  248         for (
i = 0; 
i < 256; 
i++) {
 
  249             uint32_t nc = (
pixel->freq[
i] >> 1) + 1;
 
  253         for (
i = 0; 
i < 16; 
i++) {
 
  255             uint32_t i16_17 = 
i << 4;
 
  256             for (j = 0; j < 16; j++)
 
  257                 sum += 
pixel->freq[i16_17 + j];
 
  261     pixel->total_freq = totfr;
 
  263     *rval = 
c & 
s->cbits;
 
  271     const int cxshift = 
s->cxshift;
 
  278     *cx1 = (*cx << 6) & 0xFC0;
 
  284     *cx1 = (*cx << 6) & 0xFC0;
 
  290     *cx1 = (*cx << 6) & 0xFC0;
 
  300     int cx = 0, cx1 = 0, k = 0;
 
  301     int run, off, y = 0, x = 0, 
ret;
 
  302     uint32_t clr = 0, 
r, 
g, 
b, backstep = linesize - avctx->
width;
 
  303     uint32_t lx, ly, ptype;
 
  309     while (k < avctx->
width + 1) {
 
  320         clr = (
b << 16) + (
g << 8) + 
r;
 
  326             dst[y * linesize + x] = clr;
 
  330             if (x >= avctx->
width) {
 
  348             clr = (
b << 16) + (
g << 8) + 
r;
 
  359                            dst, linesize, &lx, &ly,
 
  360                            backstep, off, &cx, &cx1);
 
  369                         uint32_t *dst, 
int linesize,
 
  370                         uint32_t *prev, 
int plinesize)
 
  375     int backstep = linesize - avctx->
width;
 
  377     if (bytestream2_get_byte(gb) == 0)
 
  397     memset(
s->blocks, 0, 
sizeof(*
s->blocks) * 
s->nbcount);
 
  409         while (min < s->nbcount && count-- > 0) {
 
  410             s->blocks[
min++] = fill;
 
  418     for (y = 0; y < 
s->nby; y++) {
 
  419         for (x = 0; x < 
s->nbx; x++) {
 
  420             int sy1 = 0, sy2 = 16, sx1 = 0, sx2 = 16;
 
  422             if (
s->blocks[y * 
s->nbx + x] == 0)
 
  425             if (((
s->blocks[y * 
s->nbx + x] - 1) & 1) > 0) {
 
  436             if (((
s->blocks[y * 
s->nbx + x] - 1) & 2) > 0) {
 
  437                 int i, j, by = y * 16, bx = x * 16;
 
  448                 if (by + mvy + sy1 < 0 || bx + mvx + sx1 < 0 ||
 
  449                     by + mvy + sy1 >= avctx->
height || bx + mvx + sx1 >= avctx->
width)
 
  452                 for (
i = 0; 
i < sy2 - sy1 && (by + sy1 + 
i) < avctx->
height && (by + mvy + sy1 + 
i) < avctx->
height; 
i++) {
 
  453                     for (j = 0; j < sx2 - sx1 && (bx + sx1 + j) < avctx->
width && (bx + mvx + sx1 + j) < avctx->
width; j++) {
 
  454                         dst[(by + 
i + sy1) * linesize + bx + sx1 + j] = prev[(by + mvy + sy1 + 
i) * plinesize + bx + sx1 + mvx + j];
 
  458                 int run, bx = x * 16 + sx1, by = y * 16 + sy1;
 
  459                 uint32_t 
r, 
g, 
b, clr, ptype = 0;
 
  461                 if (bx >= avctx->
width)
 
  464                 for (; by < y * 16 + sy2 && by < avctx->
height;) {
 
  473                         clr = (
b << 16) + (
g << 8) + 
r;
 
  484                                        dst, prev, linesize, plinesize, &bx, &by,
 
  485                                        backstep, sx1, sx2, &cx, &cx1);
 
  513     type = bytestream2_peek_byte(gb);
 
  521                            s->current_frame->linesize[0] / 4);
 
  522     } 
else if (
type == 18) {
 
  528                            s->current_frame->linesize[0] / 4);
 
  529     } 
else if (
type == 34) {
 
  533                             s->current_frame->linesize[0] / 4);
 
  534     } 
else if (
type == 17 || 
type == 33) {
 
  535         uint32_t clr, *dst = (uint32_t *)
s->current_frame->data[0];
 
  544             uint16_t 
value = bytestream2_get_le16(gb);
 
  550             clr = (
r << 16) + (
g << 8) + 
b;
 
  552             clr = bytestream2_get_le24(gb);
 
  554         for (y = 0; y < avctx->
height; y++) {
 
  557             dst += 
s->current_frame->linesize[0] / 4;
 
  559     } 
else if (
type == 0 || 
type == 1) {
 
  562         if (
s->version == 1 || 
s->version == 2)
 
  564                                s->current_frame->linesize[0] / 4,
 
  565                                (uint32_t *)
s->last_frame->data[0],
 
  566                                s->last_frame->linesize[0] / 4);
 
  569                                 s->current_frame->linesize[0] / 4,
 
  570                                 (uint32_t *)
s->last_frame->data[0],
 
  571                                 s->last_frame->linesize[0] / 4);
 
  597         for (y = 0; y < avctx->
height; y++) {
 
  599             if (!(((uintptr_t)dst) & 7)) {
 
  600                 uint64_t *dst64 = (uint64_t *)dst;
 
  602                 for (x = 0; x < 
w; x++) {
 
  603                     dst64[x] = (dst64[x] << 3) & 0xFCFCFCFCFCFCFCFCULL;
 
  608             for (; x < avctx->
width * 4; x++) {
 
  609                 dst[x] = dst[x] << 3;
 
  645     s->nbx = (avctx->
width + 15) / 16;
 
  646     s->nby = (avctx->
height + 15) / 16;
 
  647     s->nbcount = 
s->nbx * 
s->nby;
 
  654     if (!
s->last_frame || !
s->current_frame)
 
  
#define FF_CODEC_CAP_INIT_CLEANUP
The codec allows calling the close function for deallocation even if the init function returned a fai...
 
Filter the word “frame” indicates either a video frame or a group of audio as stored in an AVFrame structure Format for each input and each output the list of supported formats For video that means pixel format For audio that means channel sample they are references to shared objects When the negotiation mechanism computes the intersection of the formats supported at each end of a all references to both lists are replaced with a reference to the intersection And when a single format is eventually chosen for a link amongst the remaining all references to the list are updated That means that if a filter requires that its input and output have the same format amongst a supported all it has to do is use a reference to the same list of formats query_formats can leave some formats unset and return AVERROR(EAGAIN) to cause the negotiation mechanism toagain later. That can be used by filters with complex requirements to use the format negotiated on one link to set the formats supported on another. Frame references ownership and permissions
 
static void comp(unsigned char *dst, ptrdiff_t dst_stride, unsigned char *src, ptrdiff_t src_stride, int add)
 
static av_cold int decode_close(AVCodecContext *avctx)
 
void av_frame_free(AVFrame **frame)
Free the frame and any dynamically allocated objects in it, e.g.
 
static int get_freq0(RangeCoder *rc, uint32_t total_freq, uint32_t *freq)
 
This structure describes decoded (raw) audio or video data.
 
trying all byte sequences megabyte in length and selecting the best looking sequence will yield cases to try But a word about which is also called distortion Distortion can be quantified by almost any quality measurement one chooses the sum of squared differences is used but more complex methods that consider psychovisual effects can be used as well It makes no difference in this discussion First step
 
int flags
Frame flags, a combination of AV_FRAME_FLAGS.
 
uint8_t * data[AV_NUM_DATA_POINTERS]
pointer to the picture/channel planes.
 
static av_always_inline void bytestream2_skip(GetByteContext *g, unsigned int size)
 
AVCodec p
The public AVCodec.
 
it s the only field you need to keep assuming you have a context There is some magic you don t need to care about around this just let it vf type
 
AVFrame * av_frame_alloc(void)
Allocate an AVFrame and set its fields to default values.
 
#define AV_LOG_ERROR
Something went wrong and cannot losslessly be recovered.
 
static int decompress_p(AVCodecContext *avctx, uint32_t *dst, int linesize, uint32_t *prev, int plinesize)
 
#define AV_FRAME_FLAG_KEY
A flag to mark frames that are keyframes.
 
void av_memcpy_backptr(uint8_t *dst, int back, int cnt)
Overlapping memcpy() implementation.
 
#define FF_CODEC_DECODE_CB(func)
 
static int op(uint8_t **dst, const uint8_t *dst_end, GetByteContext *gb, int pixel, int count, int *x, int width, int linesize)
Perform decode operation.
 
static int decode_run_i(AVCodecContext *avctx, uint32_t ptype, int run, int *px, int *py, uint32_t clr, uint32_t *dst, int linesize, uint32_t *plx, uint32_t *ply, uint32_t backstep, int off, int *cx, int *cx1)
 
static av_cold int decode_init(AVCodecContext *avctx)
 
#define CODEC_LONG_NAME(str)
 
#define AVERROR_PATCHWELCOME
Not yet implemented in FFmpeg, patches welcome.
 
@ AV_PICTURE_TYPE_I
Intra.
 
static int get_freq(RangeCoder *rc, uint32_t total_freq, uint32_t *freq)
 
@ AV_PIX_FMT_BGR0
packed BGR 8:8:8, 32bpp, BGRXBGRX... X=unused/undefined
 
static void reinit_tables(SCPRContext *s)
 
Undefined Behavior In the C some operations are like signed integer dereferencing freed accessing outside allocated Undefined Behavior must not occur in a C it is not safe even if the output of undefined operations is unused The unsafety may seem nit picking but Optimizing compilers have in fact optimized code on the assumption that no undefined Behavior occurs Optimizing code based on wrong assumptions can and has in some cases lead to effects beyond the output of computations The signed integer overflow problem in speed critical code Code which is highly optimized and works with signed integers sometimes has the problem that often the output of the computation does not c
 
static av_always_inline int bytestream2_get_bytes_left(GetByteContext *g)
 
static int decompress_i(AVCodecContext *avctx, uint32_t *dst, int linesize)
 
enum AVPictureType pict_type
Picture type of the frame.
 
int ff_get_buffer(AVCodecContext *avctx, AVFrame *frame, int flags)
Get a buffer for a frame.
 
int(* init)(AVBSFContext *ctx)
 
#define AV_CODEC_CAP_DR1
Codec uses get_buffer() or get_encode_buffer() for allocating buffers and supports custom allocators.
 
int av_frame_ref(AVFrame *dst, const AVFrame *src)
Set up a new reference to the data described by the source frame.
 
int av_frame_copy(AVFrame *dst, const AVFrame *src)
Copy the frame data from src to dst.
 
const FFCodec ff_scpr_decoder
 
static int decode_run_p(AVCodecContext *avctx, uint32_t ptype, int run, int x, int y, uint32_t clr, uint32_t *dst, uint32_t *prev, int linesize, int plinesize, uint32_t *bx, uint32_t *by, uint32_t backstep, int sx1, int sx2, int *cx, int *cx1)
 
static int decode_value(SCPRContext *s, uint32_t *cnt, uint32_t maxc, uint32_t step, uint32_t *rval)
 
@ AV_PIX_FMT_RGB0
packed RGB 8:8:8, 32bpp, RGBXRGBX... X=unused/undefined
 
static int decode_units(SCPRContext *s, uint32_t *r, uint32_t *g, uint32_t *b, int *cx, int *cx1)
 
static int decompress_i3(AVCodecContext *avctx, uint32_t *dst, int linesize)
 
int bits_per_coded_sample
bits per sample/pixel from the demuxer (needed for huffyuv).
 
#define i(width, name, range_min, range_max)
 
static int decode_unit(SCPRContext *s, PixelModel *pixel, uint32_t step, uint32_t *rval)
 
#define av_malloc_array(a, b)
 
static int decompress_p3(AVCodecContext *avctx, uint32_t *dst, int linesize, uint32_t *prev, int plinesize)
 
it s the only field you need to keep assuming you have a context There is some magic you don t need to care about around this just let it vf default value
 
const char * name
Name of the codec implementation.
 
enum AVPixelFormat pix_fmt
Pixel format, see AV_PIX_FMT_xxx.
 
int ff_reget_buffer(AVCodecContext *avctx, AVFrame *frame, int flags)
Identical in function to ff_get_buffer(), except it reuses the existing buffer if available.
 
#define FFSWAP(type, a, b)
 
static int decode0(GetByteContext *gb, RangeCoder *rc, uint32_t cumFreq, uint32_t freq, uint32_t total_freq)
 
static int decode(GetByteContext *gb, RangeCoder *rc, uint32_t cumFreq, uint32_t freq, uint32_t total_freq)
 
main external API structure.
 
@ AV_PICTURE_TYPE_P
Predicted.
 
This structure stores compressed data.
 
int width
picture width / height.
 
static av_always_inline void bytestream2_init(GetByteContext *g, const uint8_t *buf, int buf_size)
 
int linesize[AV_NUM_DATA_POINTERS]
For video, a positive or negative value, which is typically indicating the size in bytes of each pict...
 
#define AVERROR_INVALIDDATA
Invalid data found when processing input.
 
static void init_rangecoder(RangeCoder *rc, GetByteContext *gb)
 
static int decode_frame(AVCodecContext *avctx, AVFrame *frame, int *got_frame, AVPacket *avpkt)