#include <rtsp.h>
Data Fields | |
const AVClass * | class |
Class for private options. | |
URLContext * | rtsp_hd |
int | nb_rtsp_streams |
number of items in the 'rtsp_streams' variable | |
struct RTSPStream ** | rtsp_streams |
streams in this session | |
enum RTSPClientState | state |
indicator of whether we are currently receiving data from the server. | |
int64_t | seek_timestamp |
the seek value requested when calling av_seek_frame(). | |
int | seq |
RTSP command sequence number. | |
char | session_id [512] |
copy of RTSPMessageHeader->session_id, i.e. | |
int | timeout |
copy of RTSPMessageHeader->timeout, i.e. | |
int64_t | last_cmd_time |
timestamp of the last RTSP command that we sent to the RTSP server. | |
enum RTSPTransport | transport |
the negotiated data/packet transport protocol; e.g. | |
enum RTSPLowerTransport | lower_transport |
the negotiated network layer transport protocol; e.g. | |
enum RTSPServerType | server_type |
brand of server that we're talking to; e.g. | |
char | real_challenge [64] |
the "RealChallenge1:" field from the server | |
char | auth [128] |
plaintext authorization line (username:password) | |
HTTPAuthState | auth_state |
authentication state | |
char | last_reply [2048] |
The last reply of the server to a RTSP command. | |
void * | cur_transport_priv |
RTSPStream->transport_priv of the last stream that we read a packet from. | |
enum AVDiscard *real_setup_cache enum AVDiscard *real_setup char last_subscription[1024] AVFormatContext *asf_ctx uint64_t asf_pb_pos char control_uri[1024] URLContext *rtsp_hd_out enum RTSPControlTransport | control_transport |
stream setup during the last frame read. | |
int | nb_byes |
uint8_t * | recvbuf |
Reusable buffer for receiving packets. | |
int | lower_transport_mask |
A mask with all requested transport methods. | |
uint64_t | packets |
The number of returned packets. | |
struct pollfd * | p |
Polling array for udp. | |
int | get_parameter_supported |
Whether the server supports the GET_PARAMETER method. | |
int | initial_pause |
Do not begin to play the stream immediately. | |
int | rtp_muxer_flags |
Option flags for the chained RTP muxer. | |
int | accept_dynamic_rate |
Whether the server accepts the x-Dynamic-Rate header. | |
int | rtsp_flags |
Various option flags for the RTSP muxer/demuxer. | |
int | media_type_mask |
Mask of all requested media types. | |
int | rtp_port_min |
Minimum and maximum local UDP ports. | |
int | rtp_port_max |
int | need_subscription |
The following are used for Real stream selection. |
Definition at line 209 of file rtsp.h.
char RTSPState::auth[128] |
const AVClass* RTSPState::class |
enum AVDiscard* real_setup_cache enum AVDiscard* real_setup char last_subscription [1024] AVFormatContext* asf_ctx uint64_t asf_pb_pos char control_uri [1024] URLContext* rtsp_hd_out enum RTSPControlTransport RTSPState::control_transport |
stream setup during the last frame read.
This is used to detect if we need to subscribe or unsubscribe to any new streams. current stream setup. This is a temporary buffer used to compare current setup to previous frame setup. the last value of the "SET_PARAMETER Subscribe:" RTSP command. this is used to send the same "Unsubscribe:" if stream setup changed, before sending a new "Subscribe:" command. The following are used for RTP/ASF streams ASF demuxer context for the embedded ASF stream from WMS servers cache for position of the asf demuxer, since we load a new data packet in the bytecontext for each incoming RTSP packet. some MS RTSP streams contain a URL in the SDP that we need to use for all subsequent RTSP requests, rather than the input URI; in other cases, this is a copy of AVFormatContext->filename. Additional output handle, used when input and output are done separately, eg for HTTP tunneling. RTSP transport mode, such as plain or tunneled.
Whether the server supports the GET_PARAMETER method.
Definition at line 343 of file rtsp.h.
Referenced by rtsp_read_packet().
Do not begin to play the stream immediately.
Definition at line 348 of file rtsp.h.
Referenced by rtsp_read_header().
int64_t RTSPState::last_cmd_time |
timestamp of the last RTSP command that we sent to the RTSP server.
This is used to calculate when to send dummy commands to keep the connection alive, in conjunction with timeout.
Definition at line 246 of file rtsp.h.
Referenced by rtsp_read_packet().
char RTSPState::last_reply[2048] |
the negotiated network layer transport protocol; e.g.
TCP or UDP uni-/multicast
Definition at line 253 of file rtsp.h.
Referenced by ff_rtsp_undo_setup(), rtsp_open_transport_ctx(), rtsp_read_packet(), and rtsp_write_packet().
A mask with all requested transport methods.
Definition at line 328 of file rtsp.h.
Referenced by rtsp_read_packet().
number of items in the 'rtsp_streams' variable
Definition at line 214 of file rtsp.h.
Referenced by ff_rtsp_close_streams(), ff_rtsp_setup_output_streams(), ff_rtsp_tcp_read_packet(), ff_rtsp_undo_setup(), rtsp_read_packet(), rtsp_read_play(), and rtsp_write_packet().
The following are used for Real stream selection.
whether we need to send a "SET_PARAMETER Subscribe:" command
Definition at line 279 of file rtsp.h.
Referenced by rtsp_read_packet(), rtsp_read_pause(), and rtsp_read_play().
struct pollfd* RTSPState::p [read] |
Polling array for udp.
Definition at line 338 of file rtsp.h.
Referenced by ff_rtsp_close_streams().
uint64_t RTSPState::packets |
The number of returned packets.
Definition at line 333 of file rtsp.h.
Referenced by rtsp_read_packet().
char RTSPState::real_challenge[64] |
the "RealChallenge1:" field from the server
Definition at line 261 of file rtsp.h.
Referenced by resetup_tcp().
Reusable buffer for receiving packets.
Definition at line 323 of file rtsp.h.
Referenced by ff_rtsp_close_streams().
Definition at line 211 of file rtsp.h.
Referenced by ff_rtsp_tcp_read_packet(), and rtsp_write_packet().
struct RTSPStream** RTSPState::rtsp_streams [read] |
streams in this session
Definition at line 216 of file rtsp.h.
Referenced by ff_rtsp_close_streams(), ff_rtsp_setup_output_streams(), ff_rtsp_tcp_read_packet(), ff_rtsp_undo_setup(), rtsp_read_play(), and rtsp_write_packet().
int64_t RTSPState::seek_timestamp |
the seek value requested when calling av_seek_frame().
This value is subsequently used as part of the "Range" parameter when emitting the RTSP PLAY command. If we are currently playing, this command is called instantly. If we are currently paused, this command is called whenever we resume playback. Either way, the value is only used once, see rtsp_read_play() and rtsp_read_seek().
Definition at line 230 of file rtsp.h.
Referenced by rtsp_read_play(), and rtsp_read_seek().
int RTSPState::seq |
brand of server that we're talking to; e.g.
WMS, REAL or other. Detected based on the value of RTSPMessageHeader->server or the presence of RTSPMessageHeader->real_challenge
Definition at line 258 of file rtsp.h.
Referenced by ff_rtsp_setup_input_streams(), rtsp_read_packet(), rtsp_read_pause(), and rtsp_read_play().
char RTSPState::session_id[512] |
copy of RTSPMessageHeader->session_id, i.e.
the server-provided session identifier that the client should re-transmit in each RTSP command
Definition at line 236 of file rtsp.h.
Referenced by rtsp_read_packet().
indicator of whether we are currently receiving data from the server.
Basically this isn't more than a simple cache of the last PLAY/PAUSE command sent to the server, to make sure we don't send 2x the same unexpectedly or commands in the wrong state.
Definition at line 222 of file rtsp.h.
Referenced by ff_rtsp_tcp_read_packet(), rtsp_read_packet(), rtsp_read_pause(), rtsp_read_play(), rtsp_read_seek(), rtsp_write_packet(), and rtsp_write_record().
copy of RTSPMessageHeader->timeout, i.e.
the time (in seconds) that the server will go without traffic on the RTSP/TCP line before it closes the connection.
Definition at line 241 of file rtsp.h.
Referenced by rtsp_read_packet().
the negotiated data/packet transport protocol; e.g.
RTP or RDT
Definition at line 249 of file rtsp.h.
Referenced by ff_rtsp_tcp_read_packet(), ff_rtsp_undo_setup(), rtsp_open_transport_ctx(), and rtsp_read_play().