Table of Contents
- 1 Synopsis
- 2 Description
- 3 Detailed description
- 4 Options
- 5 Configuration file syntax
- 6 Stream examples
- 7 See Also
- 8 Authors
ffserver is a streaming server for both audio and video.
It supports several live feeds, streaming from files and time shifting
on live feeds. You can seek to positions in the past on each live
feed, provided you specify a big enough feed storage.
ffserver is configured through a configuration file, which
is read at startup. If not explicitly specified, it will read from
ffserver receives prerecorded files or FFM streams from some
ffmpeg instance as input, then streams them over
ffserver instance will listen on some port as specified
in the configuration file. You can launch one or more instances of
ffmpeg and send one or more FFM streams to the port where
ffserver is expecting to receive them. Alternately, you can make
ffserver launch such
ffmpeg instances at startup.
Input streams are called feeds, and each one is specified by a
<Feed> section in the configuration file.
For each feed you can have different output streams in various
formats, each one specified by a
<Stream> section in the
ffserver works by forwarding streams encoded by
ffmpeg, or pre-recorded streams which are read from disk.
ffserver acts as an HTTP server, accepting POST
ffmpeg to acquire the stream to publish, and
serving RTSP clients or HTTP clients GET requests with the stream
A feed is an FFM stream created by
ffmpeg, and sent to
a port where
ffserver is listening.
Each feed is identified by a unique name, corresponding to the name
of the resource published on
ffserver, and is configured by
Feed section in the configuration file.
The feed publish URL is given by:
where ffserver_ip_address is the IP address of the machine where
ffserver is installed, http_port is the port number of
the HTTP server (configured through the HTTPPort option), and
feed_name is the name of the corresponding feed defined in the
Each feed is associated to a file which is stored on disk. This stored file is used to send pre-recorded data to a player as fast as possible when new content is added in real-time to the stream.
A "live-stream" or "stream" is a resource published by
ffserver, and made accessible through the HTTP protocol to
A stream can be connected to a feed, or to a file. In the first case,
the published stream is forwarded from the corresponding feed
generated by a running instance of
ffmpeg, in the second
case the stream is read from a pre-recorded file.
Each stream is identified by a unique name, corresponding to the name
of the resource served by
ffserver, and is configured by
Stream section in the configuration file.
The stream access HTTP URL is given by:
The stream access RTSP URL is given by:
stream_name is the name of the corresponding stream defined in
the configuration file. options is a list of options specified
after the URL which affects how the stream is served by
ffserver. http_port and rtsp_port are the HTTP
and RTSP ports configured with the options HTTPPort and
In case the stream is associated to a feed, the encoding parameters
must be configured in the stream configuration. They are sent to
ffmpeg when setting up the encoding. This allows
ffserver to define the encoding parameters used by
ffmpeg override_ffserver commandline option
allows one to override the encoding parameters set by the server.
Multiple streams can be connected to the same feed.
For example, you can have a situation described by the following graph:
_________ __________ | | | | ffmpeg 1 -----| feed 1 |-----| stream 1 | \ |_________|\ |__________| \ \ \ \ __________ \ \ | | \ \| stream 2 | \ |__________| \ \ _________ __________ \ | | | | \| feed 2 |-----| stream 3 | |_________| |__________| _________ __________ | | | | ffmpeg 2 -----| feed 3 |-----| stream 4 | |_________| |__________| _________ __________ | | | | | file 1 |-----| stream 5 | |_________| |__________|
FFM and FFM2 are formats used by ffserver. They allow storing a wide variety of video and audio streams and encoding options, and can store a moving time segment of an infinite movie or a whole movie.
FFM is version specific, and there is limited compatibility of FFM files generated by one version of ffmpeg/ffserver and another version of ffmpeg/ffserver. It may work but it is not guaranteed to work.
FFM2 is extensible while maintaining compatibility and should work between differing versions of tools. FFM2 is the default.
ffserver supports an HTTP interface which exposes the
current status of the server.
Simply point your browser to the address of the special status stream specified in the configuration file.
For example if you have:
<Stream status.html> Format status # Only allow local people to get the status ACL allow localhost ACL allow 192.168.0.0 192.168.255.255 </Stream>
then the server will post a page with the status information when the special stream status.html is requested.
As a simple test, just run the following two command lines where INPUTFILE is some file which you can decode with ffmpeg:
ffserver -f doc/ffserver.conf & ffmpeg -i INPUTFILE http://localhost:8090/feed1.ffm
At this point you should be able to go to your Windows machine and fire up Windows Media Player (WMP). Go to Open URL and enter
You should (after a short delay) see video and hear audio.
WARNING: trying to stream test1.mpg doesn’t work with WMP as it tries to transfer the entire file before starting to play. The same is true of AVI files.
You should edit the ffserver.conf file to suit your needs (in
terms of frame rates etc). Then install
ffmpeg, write a script to start them up, and off you go.
You can replay video from .ffm files that was recorded earlier. However, there are a number of caveats, including the fact that the ffserver parameters must match the original parameters used to record the file. If they do not, then ffserver deletes the file before recording into it. (Now that I write this, it seems broken).
You can fiddle with many of the codec choices and encoding parameters, and there are a bunch more parameters that you cannot control. Post a message to the mailing list if there are some ’must have’ parameters. Look in ffserver.conf for a list of the currently available controls.
It will automatically generate the ASX or RAM files that are often used in browsers. These files are actually redirections to the underlying ASF or RM file. The reason for this is that the browser often fetches the entire file before starting up the external viewer. The redirection files are very small and can be transferred quickly. [The stream itself is often ’infinite’ and thus the browser tries to download it and never finishes.]
* When you connect to a live stream, most players (WMP, RA, etc) want to buffer a certain number of seconds of material so that they can display the signal continuously. However, ffserver (by default) starts sending data in realtime. This means that there is a pause of a few seconds while the buffering is being done by the player. The good news is that this can be cured by adding a ’?buffer=5’ to the end of the URL. This means that the stream should start 5 seconds in the past – and so the first 5 seconds of the stream are sent as fast as the network will allow. It will then slow down to real time. This noticeably improves the startup experience.
You can also add a ’Preroll 15’ statement into the ffserver.conf that will add the 15 second prebuffering on all requests that do not otherwise specify a time. In addition, ffserver will skip frames until a key_frame is found. This further reduces the startup delay by not transferring data that will be discarded.
It turns out that (on my machine at least) the number of frames successfully grabbed is marginally less than the number that ought to be grabbed. This means that the timestamp in the encoded data stream gets behind realtime. This means that if you say ’Preroll 10’, then when the stream gets 10 or more seconds behind, there is no Preroll left.
Fixing this requires a change in the internals of how timestamps are handled.
Yes (subject to the limitation outlined above). Also note that whenever you start ffserver, it deletes the ffm file (if any parameters have changed), thus wiping out what you had recorded before.
The format of the
?date=xxxxxx is fairly flexible. You should use one
of the following formats (the ’T’ is literal):
* YYYY-MM-DDTHH:MM:SS (localtime) * YYYY-MM-DDTHH:MM:SSZ (UTC)
You can omit the YYYY-MM-DD, and then it refers to the current day. However note that ‘?date=16:00:00’ refers to 16:00 on the current day – this may be in the future and so is unlikely to be useful.
You use this by adding the ?date= to the end of the URL for the stream. For example: ‘http://localhost:8080/test.asf?date=2002-07-26T23:05:00’.
All the numerical options, if not specified otherwise, accept a string representing a number as input, which may be followed by one of the SI unit prefixes, for example: ’K’, ’M’, or ’G’.
If ’i’ is appended to the SI unit prefix, the complete prefix will be interpreted as a unit prefix for binary multiples, which are based on powers of 1024 instead of powers of 1000. Appending ’B’ to the SI unit prefix multiplies the value by 8. This allows using, for example: ’KB’, ’MiB’, ’G’ and ’B’ as number suffixes.
Options which do not take arguments are boolean options, and set the corresponding value to true. They can be set to false by prefixing the option name with "no". For example using "-nofoo" will set the boolean option with name "foo" to false.
Some options are applied per-stream, e.g. bitrate or codec. Stream specifiers are used to precisely specify which stream(s) a given option belongs to.
A stream specifier is a string generally appended to the option name and
separated from it by a colon. E.g.
-codec:a:1 ac3 contains the
a:1 stream specifier, which matches the second audio stream. Therefore, it
would select the ac3 codec for the second audio stream.
A stream specifier can match several streams, so that the option is applied to all
of them. E.g. the stream specifier in
-b:a 128k matches all audio
An empty stream specifier matches all streams. For example,
-codec: copy would copy all the streams without reencoding.
Possible forms of stream specifiers are:
Matches the stream with this index. E.g.
-threads:1 4would set the thread count for the second stream to 4.
stream_type is one of following: ’v’ or ’V’ for video, ’a’ for audio, ’s’ for subtitle, ’d’ for data, and ’t’ for attachments. ’v’ matches all video streams, ’V’ only matches video streams which are not attached pictures, video thumbnails or cover arts. If stream_index is given, then it matches stream number stream_index of this type. Otherwise, it matches all streams of this type.
If stream_index is given, then it matches the stream with number stream_index in the program with the id program_id. Otherwise, it matches all streams in the program.
- #stream_id or i:stream_id
Match the stream by stream id (e.g. PID in MPEG-TS container).
Matches streams with the metadata tag key having the specified value. If value is not given, matches streams that contain the given tag with any value.
Matches streams with usable configuration, the codec must be defined and the essential information such as video dimension or audio sample rate must be present.
Note that in
ffmpeg, matching by metadata will only work properly for input files.
These options are shared amongst the ff* tools.
- -h, -?, -help, --help [arg]
Show help. An optional parameter may be specified to print help about a specific item. If no argument is specified, only basic (non advanced) tool options are shown.
Possible values of arg are:
Print advanced tool options in addition to the basic tool options.
Print complete list of options, including shared and private options for encoders, decoders, demuxers, muxers, filters, etc.
Print detailed information about the decoder named decoder_name. Use the -decoders option to get a list of all decoders.
Print detailed information about the encoder named encoder_name. Use the -encoders option to get a list of all encoders.
Print detailed information about the demuxer named demuxer_name. Use the -formats option to get a list of all demuxers and muxers.
Print detailed information about the muxer named muxer_name. Use the -formats option to get a list of all muxers and demuxers.
Print detailed information about the filter name filter_name. Use the -filters option to get a list of all filters.
Show available formats (including devices).
Show available demuxers.
Show available muxers.
Show available devices.
Show all codecs known to libavcodec.
Note that the term ’codec’ is used throughout this documentation as a shortcut for what is more correctly called a media bitstream format.
Show available decoders.
Show all available encoders.
Show available bitstream filters.
Show available protocols.
Show available libavfilter filters.
Show available pixel formats.
Show available sample formats.
Show channel names and standard channel layouts.
Show recognized color names.
- -sources device[,opt1=val1[,opt2=val2]...]
Show autodetected sources of the intput device. Some devices may provide system-dependent source names that cannot be autodetected. The returned list cannot be assumed to be always complete.
ffmpeg -sources pulse,server=192.168.0.4
- -sinks device[,opt1=val1[,opt2=val2]...]
Show autodetected sinks of the output device. Some devices may provide system-dependent sink names that cannot be autodetected. The returned list cannot be assumed to be always complete.
ffmpeg -sinks pulse,server=192.168.0.4
- -loglevel [repeat+]loglevel | -v [repeat+]loglevel
Set the logging level used by the library. Adding "repeat+" indicates that repeated log output should not be compressed to the first line and the "Last message repeated n times" line will be omitted. "repeat" can also be used alone. If "repeat" is used alone, and with no prior loglevel set, the default loglevel will be used. If multiple loglevel parameters are given, using ’repeat’ will not change the loglevel. loglevel is a string or a number containing one of the following values:
- ‘quiet, -8’
Show nothing at all; be silent.
- ‘panic, 0’
Only show fatal errors which could lead the process to crash, such as an assertion failure. This is not currently used for anything.
- ‘fatal, 8’
Only show fatal errors. These are errors after which the process absolutely cannot continue.
- ‘error, 16’
Show all errors, including ones which can be recovered from.
- ‘warning, 24’
Show all warnings and errors. Any message related to possibly incorrect or unexpected events will be shown.
- ‘info, 32’
Show informative messages during processing. This is in addition to warnings and errors. This is the default value.
- ‘verbose, 40’
info, except more verbose.
- ‘debug, 48’
Show everything, including debugging information.
- ‘trace, 56’
By default the program logs to stderr. If coloring is supported by the terminal, colors are used to mark errors and warnings. Log coloring can be disabled setting the environment variable
NO_COLOR, or can be forced setting the environment variable
AV_LOG_FORCE_COLOR. The use of the environment variable
NO_COLORis deprecated and will be dropped in a future FFmpeg version.
Dump full command line and console output to a file named
program-YYYYMMDD-HHMMSS.login the current directory. This file can be useful for bug reports. It also implies
Setting the environment variable
FFREPORTto any value has the same effect. If the value is a ’:’-separated key=value sequence, these options will affect the report; option values must be escaped if they contain special characters or the options delimiter ’:’ (see the “Quoting and escaping” section in the ffmpeg-utils manual).
The following options are recognized:
set the file name to use for the report;
%pis expanded to the name of the program,
%tis expanded to a timestamp,
%%is expanded to a plain
set the log verbosity level using a numerical value (see
For example, to output a report to a file named ffreport.log using a log level of
32(alias for log level
FFREPORT=file=ffreport.log:level=32 ffmpeg -i input output
Errors in parsing the environment variable are not fatal, and will not appear in the report.
Suppress printing banner.
All FFmpeg tools will normally show a copyright notice, build options and library versions. This option can be used to suppress printing this information.
- -cpuflags flags (global)
Allows setting and clearing cpu flags. This option is intended for testing. Do not use it unless you know what you’re doing.
ffmpeg -cpuflags -sse+mmx ... ffmpeg -cpuflags mmx ... ffmpeg -cpuflags 0 ...
Possible flags for this option are:
- ‘Specific Processors’
This option is used to benchmark all available OpenCL devices and print the results. This option is only available when FFmpeg has been compiled with
When FFmpeg is configured with
--enable-opencl, the options for the global OpenCL context are set via -opencl_options. See the "OpenCL Options" section in the ffmpeg-utils manual for the complete list of supported options. Amongst others, these options include the ability to select a specific platform and device to run the OpenCL code on. By default, FFmpeg will run on the first device of the first platform. While the options for the global OpenCL context provide flexibility to the user in selecting the OpenCL device of their choice, most users would probably want to select the fastest OpenCL device for their system.
This option assists the selection of the most efficient configuration by identifying the appropriate device for the user’s system. The built-in benchmark is run on all the OpenCL devices and the performance is measured for each device. The devices in the results list are sorted based on their performance with the fastest device listed first. The user can subsequently invoke
ffmpegusing the device deemed most appropriate via -opencl_options to obtain the best performance for the OpenCL accelerated code.
Typical usage to use the fastest OpenCL device involve the following steps.
Run the command:
Note down the platform ID (pidx) and device ID (didx) of the first i.e. fastest device in the list. Select the platform and device using the command:
ffmpeg -opencl_options platform_idx=pidx:device_idx=didx ...
- -opencl_options options (global)
Set OpenCL environment options. This option is only available when FFmpeg has been compiled with
options must be a list of key=value option pairs separated by ’:’. See the “OpenCL Options” section in the ffmpeg-utils manual for the list of supported options.
These options are provided directly by the libavformat, libavdevice and libavcodec libraries. To see the list of available AVOptions, use the -help option. They are separated into two categories:
These options can be set for any container, codec or device. Generic options are listed under AVFormatContext options for containers/devices and under AVCodecContext options for codecs.
These options are specific to the given container, device or codec. Private options are listed under their corresponding containers/devices/codecs.
For example to write an ID3v2.3 header instead of a default ID3v2.4 to an MP3 file, use the id3v2_version private option of the MP3 muxer:
ffmpeg -i input.flac -id3v2_version 3 out.mp3
All codec AVOptions are per-stream, and thus a stream specifier should be attached to them.
Note: the -nooption syntax cannot be used for boolean AVOptions, use -option 0/-option 1.
Note: the old undocumented way of specifying per-stream AVOptions by prepending v/a/s to the options name is now obsolete and will be removed soon.
- -f configfile
Read configuration file configfile. If not specified it will read by default from /etc/ffserver.conf.
Enable no-launch mode. This option disables all the
Launchdirectives within the various
ffserverwill not launch any
ffmpeginstances, you will have to launch them manually.
Enable debug mode. This option increases log verbosity, and directs log messages to stdout. When specified, the CustomLog option is ignored.
ffserver reads a configuration file containing global
options and settings for each stream and feed.
The configuration file consists of global options and dedicated sections, which must be introduced by "<SECTION_NAME ARGS>" on a separate line and must be terminated by a line in the form "</SECTION_NAME>". ARGS is optional.
Currently the following sections are recognized: ‘Feed’, ‘Stream’, ‘Redirect’.
A line starting with
# is ignored and treated as a comment.
Name of options and sections are case-insensitive.
An ACL (Access Control List) specifies the address which are allowed to access a given stream, or to write a given feed.
It accepts the folling forms
- Allow/deny access to address.
ACL ALLOW <address> ACL DENY <address>
- Allow/deny access to ranges of addresses from first_address to
ACL ALLOW <first_address> <last_address> ACL DENY <first_address> <last_address>
You can repeat the ACL allow/deny as often as you like. It is on a per stream basis. The first match defines the action. If there are no matches, then the default is the inverse of the last ACL statement.
Thus ’ACL allow localhost’ only allows access from localhost. ’ACL deny 220.127.116.11 18.104.22.168’ would deny the whole of network 1 and allow everybody else.
- HTTPPort port_number
- Port port_number
- RTSPPort port_number
HTTPPort sets the HTTP server listening TCP port number, RTSPPort sets the RTSP server listening TCP port number.
Port is the equivalent of HTTPPort and is deprecated.
You must select a different port from your standard HTTP web server if it is running on the same computer.
If not specified, no corresponding server will be created.
- HTTPBindAddress ip_address
- BindAddress ip_address
- RTSPBindAddress ip_address
Set address on which the HTTP/RTSP server is bound. Only useful if you have several network interfaces.
BindAddress is the equivalent of HTTPBindAddress and is deprecated.
- MaxHTTPConnections n
Set number of simultaneous HTTP connections that can be handled. It has to be defined before the MaxClients parameter, since it defines the MaxClients maximum limit.
Default value is 2000.
- MaxClients n
Set number of simultaneous requests that can be handled. Since
ffserveris very fast, it is more likely that you will want to leave this high and use MaxBandwidth.
Default value is 5.
- MaxBandwidth kbps
Set the maximum amount of kbit/sec that you are prepared to consume when streaming to clients.
Default value is 1000.
- CustomLog filename
Set access log file (uses standard Apache log file format). ’-’ is the standard output.
If not specified
ffserverwill produce no log.
In case the commandline option -d is specified this option is ignored, and the log is written to standard output.
Set no-daemon mode. This option is currently ignored since now
ffserverwill always work in no-daemon mode, and is deprecated.
Control whether default codec options are used for the all streams or not. Each stream may overwrite this setting for its own. Default is UseDefaults. The lastest occurrence overrides previous if multiple definitions.
A Feed section defines a feed provided to
Each live feed contains one video and/or audio sequence coming from an
ffmpeg encoder or another
ffserver. This sequence
may be encoded simultaneously with several codecs at several
A feed instance specification is introduced by a line in the form:
where FEED_FILENAME specifies the unique name of the FFM stream.
The following options are recognized within a Feed section.
- File filename
- ReadOnlyFile filename
Set the path where the feed file is stored on disk.
If not specified, the /tmp/FEED.ffm is assumed, where FEED is the feed name.
If ReadOnlyFile is used the file is marked as read-only and it will not be deleted or updated.
Truncate the feed file, rather than appending to it. By default
ffserverwill append data to the file, until the maximum file size value is reached (see FileMaxSize option).
- FileMaxSize size
Set maximum size of the feed file in bytes. 0 means unlimited. The postfixes
G(2^30) are recognized.
Default value is 5M.
- Launch args
ffmpegcommand when creating
args must be a sequence of arguments to be provided to an
ffmpeginstance. The first provided argument is ignored, and it is replaced by a path with the same dirname of the
ffserverinstance, followed by the remaining argument and terminated with a path corresponding to the feed.
When the launched process exits,
ffserverwill launch another program instance.
In case you need a more complex
ffmpegconfiguration, e.g. if you need to generate multiple FFM feeds with a single
ffmpeginstance, you should launch
This option is ignored in case the commandline option -n is specified.
- ACL spec
Specify the list of IP address which are allowed or denied to write the feed. Multiple ACL options can be specified.
A Stream section defines a stream provided by
identified by a single name.
The stream is sent when answering a request containing the stream name.
A stream section must be introduced by the line:
where STREAM_NAME specifies the unique name of the stream.
The following options are recognized within a Stream section.
Encoding options are marked with the encoding tag, and they are
used to set the encoding parameters, and are mapped to libavcodec
encoding options. Not all encoding options are supported, in
particular it is not possible to set encoder private options. In order
to override the encoding options specified by
can use the
ffmpeg override_ffserver commandline
Only one of the Feed and File options should be set.
- Feed feed_name
Set the input feed. feed_name must correspond to an existing feed defined in a
When this option is set, encoding options are used to setup the encoding operated by the remote
- File filename
Set the filename of the pre-recorded input file to stream.
When this option is set, encoding options are ignored and the input file content is re-streamed as is.
- Format format_name
Set the format of the output stream.
Must be the name of a format recognized by FFmpeg. If set to ‘status’, it is treated as a status stream.
- InputFormat format_name
Set input format. If not specified, it is automatically guessed.
- Preroll n
Set this to the number of seconds backwards in time to start. Note that most players will buffer 5-10 seconds of video, and also you need to allow for a keyframe to appear in the data stream.
Default value is 0.
Do not send stream until it gets the first key frame. By default
ffserverwill send data immediately.
- MaxTime n
Set the number of seconds to run. This value set the maximum duration of the stream a client will be able to receive.
A value of 0 means that no limit is set on the stream duration.
- ACL spec
Set ACL for the stream.
- DynamicACL spec
- RTSPOption option
- MulticastAddress address
- MulticastPort port
- MulticastTTL integer
- FaviconURL url
Set favicon (favourite icon) for the server status page. It is ignored for regular streams.
- Author value
- Comment value
- Copyright value
- Title value
Set metadata corresponding to the option. All these options are deprecated in favor of Metadata.
- Metadata key value
Set metadata value on the output stream.
Control whether default codec options are used for the stream or not. Default is UseDefaults unless disabled globally.
- AudioCodec codec_name (encoding,audio)
Set audio codec.
- AudioBitRate rate (encoding,audio)
Set bitrate for the audio stream in kbits per second.
- AudioChannels n (encoding,audio)
Set number of audio channels.
- AudioSampleRate n (encoding,audio)
Set sampling frequency for audio. When using low bitrates, you should lower this frequency to 22050 or 11025. The supported frequencies depend on the selected audio codec.
- AVOptionAudio [codec:]option value (encoding,audio)
Set generic or private option for audio stream. Private option must be prefixed with codec name or codec must be defined before.
- AVPresetAudio preset (encoding,audio)
Set preset for audio stream.
- VideoCodec codec_name (encoding,video)
Set video codec.
- VideoBitRate n (encoding,video)
Set bitrate for the video stream in kbits per second.
- VideoBitRateRange range (encoding,video)
Set video bitrate range.
A range must be specified in the form minrate-maxrate, and specifies the minrate and maxrate encoding options expressed in kbits per second.
- VideoBitRateRangeTolerance n (encoding,video)
Set video bitrate tolerance in kbits per second.
- PixelFormat pixel_format (encoding,video)
Set video pixel format.
- Debug integer (encoding,video)
Set video debug encoding option.
- Strict integer (encoding,video)
Set video strict encoding option.
- VideoBufferSize n (encoding,video)
Set ratecontrol buffer size, expressed in KB.
- VideoFrameRate n (encoding,video)
Set number of video frames per second.
- VideoSize (encoding,video)
Set size of the video frame, must be an abbreviation or in the form WxH. See (ffmpeg-utils)the Video size section in the ffmpeg-utils(1) manual.
Default value is
- VideoIntraOnly (encoding,video)
Transmit only intra frames (useful for low bitrates, but kills frame rate).
- VideoGopSize n (encoding,video)
If non-intra only, an intra frame is transmitted every VideoGopSize frames. Video synchronization can only begin at an intra frame.
- VideoTag tag (encoding,video)
Set video tag.
- VideoHighQuality (encoding,video)
- Video4MotionVector (encoding,video)
- BitExact (encoding,video)
Set bitexact encoding flag.
- IdctSimple (encoding,video)
Set simple IDCT algorithm.
- Qscale n (encoding,video)
Enable constant quality encoding, and set video qscale (quantization scale) value, expressed in n QP units.
- VideoQMin n (encoding,video)
- VideoQMax n (encoding,video)
Set video qmin/qmax.
- VideoQDiff integer (encoding,video)
Set video qdiff encoding option.
- LumiMask float (encoding,video)
- DarkMask float (encoding,video)
Set lumi_mask/dark_mask encoding options.
- AVOptionVideo [codec:]option value (encoding,video)
Set generic or private option for video stream. Private option must be prefixed with codec name or codec must be defined before.
- AVPresetVideo preset (encoding,video)
Set preset for video stream.
preset must be the path of a preset file.
A server status stream is a special stream which is used to show
statistics about the
It must be specified setting the option Format to ‘status’.
A redirect section specifies where to redirect the requested URL to another page.
A redirect section must be introduced by the line:
where NAME is the name of the page which should be redirected.
It only accepts the option URL, which specify the redirection URL.
- Multipart JPEG
<Stream test.mjpg> Feed feed1.ffm Format mpjpeg VideoFrameRate 2 VideoIntraOnly NoAudio Strict -1 </Stream>
- Single JPEG
<Stream test.jpg> Feed feed1.ffm Format jpeg VideoFrameRate 2 VideoIntraOnly VideoSize 352x240 NoAudio Strict -1 </Stream>
<Stream test.swf> Feed feed1.ffm Format swf VideoFrameRate 2 VideoIntraOnly NoAudio </Stream>
- ASF compatible
<Stream test.asf> Feed feed1.ffm Format asf VideoFrameRate 15 VideoSize 352x240 VideoBitRate 256 VideoBufferSize 40 VideoGopSize 30 AudioBitRate 64 StartSendOnKey </Stream>
- MP3 audio
<Stream test.mp3> Feed feed1.ffm Format mp2 AudioCodec mp3 AudioBitRate 64 AudioChannels 1 AudioSampleRate 44100 NoVideo </Stream>
- Ogg Vorbis audio
<Stream test.ogg> Feed feed1.ffm Metadata title "Stream title" AudioBitRate 64 AudioChannels 2 AudioSampleRate 44100 NoVideo </Stream>
- Real with audio only at 32 kbits
<Stream test.ra> Feed feed1.ffm Format rm AudioBitRate 32 NoVideo </Stream>
- Real with audio and video at 64 kbits
<Stream test.rm> Feed feed1.ffm Format rm AudioBitRate 32 VideoBitRate 128 VideoFrameRate 25 VideoGopSize 25 </Stream>
- For stream coming from a file: you only need to set the input filename
and optionally a new format.
<Stream file.rm> File "/usr/local/httpd/htdocs/tlive.rm" NoAudio </Stream>
<Stream file.asf> File "/usr/local/httpd/htdocs/test.asf" NoAudio Metadata author "Me" Metadata copyright "Super MegaCorp" Metadata title "Test stream from disk" Metadata comment "Test comment" </Stream>
ffserver-all, the doc/ffserver.conf example, ffmpeg, ffplay, ffprobe, ffmpeg-utils, ffmpeg-scaler, ffmpeg-resampler, ffmpeg-codecs, ffmpeg-bitstream-filters, ffmpeg-formats, ffmpeg-devices, ffmpeg-protocols, ffmpeg-filters
The FFmpeg developers.
For details about the authorship, see the Git history of the project
(git://source.ffmpeg.org/ffmpeg), e.g. by typing the command
git log in the FFmpeg source directory, or browsing the
online repository at http://source.ffmpeg.org.
Maintainers for the specific components are listed in the file MAINTAINERS in the source code tree.
This document was generated on March 23, 2017 using makeinfo.